Components Sourcing Service

Components Sourcing Service

Beton Technology has extensive experience in component procurement and has cooperative relationships with many brand suppliers. We have signed long-term cooperation agreements with many electronic component manufacturers at home and abroad and around the world to ensure the quality of raw material sources and stable supply, and transfer the benefits to customers.


18 years of material procurement experience

Professional component engineers

Cooperate with major distribution platforms, Digikey, Mouser, RS and so on

All components are brand new and original factory.

Components Quality Control

When receiving components, we implement different QC inspection processes according to different supplier levels. All inspection items can only be shipped after passing the test. The QC workflow of electronic components is: packaging inspection, document verification, digital photography, label verification, vision inspection, measurement, testing, approval.


Stocked inductors, magnetic beads, connectors, crystal oscillators, diodes and transistors, resistors and capacitors


LCR BridgeTest

(Mainly detect resistance, capacitance and first board)


Drying oven

Drying electronic components to improve the quality and reliability of components.

Temperature and humidity monitoring

Maintain appropriate temperature and humidity to ensure the quality of components stored in the warehouse

Incoming material packaging and labeling





Indicate the material model, parameters, packaging, and quantity on the incoming material label. If there is no model, please indicate the serial number in the BOM.

The description of the incoming material label is consistent with the material description in the BOM. Please mark the alternative materials.

The editing tape has no delamination, no bending, no cracking, and no damage.

When the incoming materials are in tubes, please install them in the same direction.

Please protect and package the materials on the pallet to avoid damaging the pins and solder balls during transportation.


ComponentSourcing Capabilities

ComponentSourcing Capabilities

ComponentSourcing Capabilities

PCB parts quantity

Start with 1 tray/tape/bag

Parts sourcing turnaround time

12 days to 28 days

Passive components

Resistors, capacitors, inductors, transformers, relays, buttons, speakers, switches, connectors, antennas, sensors, detectors, sockets, etc.

Active components

Diodes, transistors, thyristors, ICs, transistors, programmable devices, optoelectronic devices, discharge devices, power supplies, vacuum, etc.

Purchase inquiry method

Send BOM or PCBA samples, or tell us your plans

Parts quality inspection

Packaging inspection, document verification, digital photography, label verification, visual inspection, measurement, IC anti-counterfeiting, approval

Parts sourcing services

24 hours/7 days

Quality Certification





Manufacturer Part Number

PCB Footprint


















1. Five elements of BOM: material description, model, dosage, part number, and packaging, all of which are indispensable.

2. Arrange components of the same category together, such as resistors and capacitors.

3. The BOM material package is consistent with the PCB pad.

4. The number of reference numbers should be consistent with the usage of the material to avoid repeated reference numbers and lack of reference numbers.

5. The same material is displayed on the same line and listed one by one. Do not use R1-5 but use R1, R2, R3, R4, R5.

6. Do not hide the content of the BOM. If there are any changes, special remarks must be made, and the model number of the replacement material must be marked.

7. Materials that do not need to be welded should be marked in the BOM with words such as "NG",”DNP”, "NO-STUFF", "NO-SMT", "no welding required", "blank", etc.

8. Some special devices have special welding requirements, which are not specified in the BOM and must be specially reminded when placing an order

How to reduce the unit cost of components for customers

Beton Technology has long-term strategic cooperation with authoritative suppliers and enjoys their discounts, such as Mouser, Digi-Key, Element14, Farnell, Future Electronics, Sparkfun, RS, Allied Electronics & Automation and local factories

Electronic component procurement EMS PCBA manufacturer Beton Technology provides component procurement services that can reduce component unit costs from the following three aspects.

þ Relying on its global procurement network of hundreds of evaluated suppliers and its rich experience in mainstream components, Beton Technology can help customers discover regional price differences and potential resources.

þ Relying on its EMS production factory, Beton Technology can jointly purchase with other large EMS and enjoy direct limited supply from the original factory.

þ Relying on a large number of customers, we can effectively integrate BOM (bill of materials), centrally purchase the same electronic components, and reduce unit costs.



Through the above methods, Beton Technology can reduce the overall procurement cost of rare components and high-value high-volume components. And even when component resources are tight, Beton Technology is still a stable supply channel for electronic component procurement.


We offer a full range of component procurement services to meet your specific needs, including:


1. Procurement

Our experienced team of procurement experts will source electronic components from our global network of reputable suppliers, ensuring you receive genuine parts at competitive prices. We also offer flexible payment terms and comprehensive quality control measures for your peace of mind.

2. Inventory management

With our just-in-time or buffer stock management options, we can help you optimize inventory levels and shorten delivery times. Our state-of-the-art warehouse management system ensures real-time visibility and accuracy of inventory data.

3. Scrap Management and Alternative Procurement

If you are facing obsolescence issues or long lead times for critical components, we can help you find suitable alternative sources and/or recommend redesign options. Our extensive database and expertise in cross-referenced parts allow us to quickly and cost-effectively identify viable alternatives.

4. Quality inspection and testing services

Our dedicated Quality Assurance (QA) team performs rigorous inspection and functional testing of all incoming and outgoing components as per industry standards and customer requirements. We can also provide inspection reports and Certificates of Conformity (CoC) upon request.

5. Customized component matching and assembly

We provide customized kitting and assembly solutions to help you streamline your production process and increase efficiency. We can package and label components according to your bill of materials (BOM) or specifications and deliver them in the format you require.

6. Supply chain analysis and optimization

Our supply chain experts can help you analyze and optimize your entire procurement process, from supplier selection and qualification to order placement and fulfillment. We use advanced tools and technology to identify areas for improvement and recommend best practices.


Our services are tailored to meet each client's unique needs, and we are committed to delivering high-quality, reliable and cost-effective solutions. Contact us today to learn more about how we can help you streamline your component procurement process.